Skip links

Open Roof
Masterpiece

Porsche 911® remastered by Gunther Werks are modern high-performance, bespoke vehicles that pay homage to the analogue drivers’ vehicles of a quarter-century ago.

435<br> hp
335 ft/lb Torque
2,590 <br>lbs
Curb Weight
5.9 <br>lbs
Power to Weight

For Ones That Favor the Open Air

Our existing Coupe restorations provide an exceptional analogue driving experience on any road or track, so to heighten the experience even further, Gunther Werks developed a new open-air model.

Taking styling cues from the legendary Speedsters of the past, we developed our own Speedster. With its shortened windscreen and lack of side windows the open-air experience has been cranked up to maximum. With no roof, the soundtrack of the glorious 4.0L flat six can now be heard in full, this adds another dimension to the whole driving experience. Couple all of this to the rush of wind through your hair, and you feel even more connected to the road in a way no other car can. This is analogue in its purest form.

Having no roof does not compromise stiffness, using modern techniques we have made the Speedster twice as stiff as a standard coupe with no weight penalty, to allow us to build a stronger, lighter, and hence faster car. This then allows us to push the boundaries of performance meaning this car is as good at mixing it with some of the best cars on the track as it is for going to your local cars and coffee meet.

The new speedster restoration by Gunther Werks includes several performance upgrades which include remapped engine tuning to give a modest horsepower and torque increase.

Limited to 25 Examples.

As Gunther Werks' production of coupe commissions was limited to 25 examples, so too Speedster commissions will be limited to only 25 unique examples. Production of the vehicle has now started, as production of 25 Coupe commission productions has just concluded.

Limited to 25 Examples.

As Gunther Werks' restorations of coupe’s was limited to 25 examples, so too Speedster restorations will be limited to only 25 unique examples. Production of the vehicle has now started, as production of 25 Coupe restorations has just concluded.

Body

To initiate the restoration process, Gunther Werks uses a convertible as a foundation and restores the chassis to accommodate the heightened performance. Unlike the typical reduction of torsional rigidity that comes with removing the roof, Gunther Werks has taken significant measures to prevent such side effects. The chassis restoration process begins by revamping the factory components that our coupes also undergo, but with additional enhancements. Upgrades are added to the space previously occupied by the rear seat compartment of the coupe, and a new roll cage and roll hoop are integrated to provide support for the new tonneau cover. These measures not only enhance occupant safety but also contribute to further strengthening the chassis.

Engine

Our 4.0-liter has been meticulously developed by Rothsport from Oregon to our specifications, to create the ultimate naturally aspirated flat-six. The original crank case is starting point for all of our engines, from there the Mahle pistons to the twin map Motec Engine management, coil over plug ignition, individual throttle bodies, billet crankshaft, rods & barrels, no moving part of the engine is left untouched.

The net result is: a 7800 rpm redline, 330lbs feet of torque, and 430+ horsepower.

Transmission

The original Getrag G50 is retained but rebuilt with completely bespoke custom ratios offering a superior balance between performance, refinement & touring. The shift linkage is upgraded, a single mass mid-weight flywheel and uprated single-plate clutch are installed, as is a new lower ratio limited slip differential featuring carbon clutches.

Left -- Swipe -- Right

Technical Specifications

GUNTHER WERKS 993 SPEEDSTER

Open Top Adventure

The Porsche 911® remastered by Gunther Werks is a modern and respectful homage to an icon - a high-performance, bespoke vehicle paying homage to the naturally aspirated automobiles of a quarter-century ago, available in convertible version.

430
bhp+
4.0 Liter, 335 lbft Torque

Engine

- 4.0 Liter, 430bhp +, 330 lbft Torque
- Billet Barrels, Billet Crank, Mahle Pistons
- Forged Conrods, Coil on Plug Coil Ignition
- 7800rpm Redline
- GT3 Plenum & Tail Box
- Equal Length Stainless Steel Headers
- Bi Mode Motec Engine Management & Bespoke Tuning

Drivetrain

- Getrag G50 6 Speed with Custom Gear Ratios
- Single Mass Mid-weight Fly Wheel and Uprated Single-plate Clutch
- Uprated Anti Rolls Bars Front & Rear
- Carbon Clutch Differential with 40% Locking

Chassis

- Full chassis strengthening, rear bracing with roll over protection and stiffened Sills
- Widened Racing Spec Front Track
- Bespoke DGR Computer Controlled Active Coil Over Suspension
- Uprated Anti Rolls Bars Front & Rear
- Hydraulic Nose Lift System
- Lightweight Bespoke Gunther Werks Spec Uprights
- Bespoke Suspension Arms w/ Upgraded Bushings & Revised Geometry
- Front Strut Brace

Brakes

- Brembo GTR 6 Piston 355mm x 32mm Slotted Disks Front
- Brembo GTR 4 Piston 345mm x 28mm Slotted Disks Rear
- Optional CCMR Carbon Brake Option
- Brembo Pads & Braided Brake Lines
- Upgraded Brake Booster
- Cross Drilled Brakes - A No Cost Option

Wheels & Tires

- Gunther Werks 18” Forged Magnesium & Carbon Fiber 2 Piece Wheels *
- Gunther Werks 18” T-6061 Forged Aluminum 3 Piece Wheels
- 5 Spoke Classic Design
- Step Lip Barrels
- Billet Aluminum Centre caps
- Aluminum Valve Stems
- Titanium Wheel Hardware
- Titanium Wheel Studs
- 18x11” Front | 18x13” Rear

* Optional

Body

- Carbon Front Fenders
- Carbon Rear Quarter Panels
- Carbon Side Skirts
- Carbon Roof
- Carbon Front Hood
- Carbon Front Bumper
- Carbon Rear Bumper
- Carbon Rear Wing
- Carbon Rear Duck Tail (Optional)
- Slip Lo Front Bumper Protection
- Honey Comb Mesh Grills 

Lighting

- Milled Aluminum Headlight Housings Utilizing Bi-LED Lighting
- Technology Inside and Out
- High Strength Aerospace Headlight Lenses
- Upgraded LED Rear Lights LED Front Turn Signals

Interior

- Alcantara and Leather Trimmed Carbon Fiber Backed Bucket Seats
- Alcantara and Leather Upper Armrest, Dashboard, Center Console
- Rear Quarter Panels and Dashboard Insert
- Porsche Classic Steering Wheel in Leather
- Remastered Gauge Dials in Classic Black and White
- Forged Aluminum Slotted Pedals, Foot Rest, and Kick Panels
- Porsche Classic Radio
- Aerospace Grade German Carpets Throughout
- Aerospace Grade German Carpet Floor Mats
- Leather Hand Brake Tray and Rear Tray
- Carbon Door Sills
- Milled Aluminum Speaker Bezels and Door Handles
- Milled Aluminum Ignition Cover
- Bevelled Ring Dials
- Milled Aluminum Ignition Key Head
- 2-Piece Carbon Fiber Front Trunk Liner
- Carbon Fiber Interior Door Panel
- Milled Aluminum Shifter

This website uses cookies to improve your web experience. For best visual experience with Gunther Werks, please visit this site on a desktop.